MARPOL 73/78 CONVENTION: LATEST UPDATES

The International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978, more commonly referred to as MARPOL 73/78, is the primary international agreement developed by the International Maritime Organization to prevent pollution of the marine environment from ships. Adopted in response to growing concern over oil spills and vessel discharges in the 1970s, it has since evolved into a comprehensive framework that addresses multiple forms of ship-source pollution. Together with SOLAS, MARPOL is regarded as one of the twin pillars of international maritime law, protecting both human life and the natural environment. MARPOL applies to all ships, though its requirements vary depending on size, type, and operation. Compliance is ensured through certification by flag states, enforcement by port state control, and the application of special provisions for designated “special areas” and “emission control areas” where stricter rules apply. Over the years, the Convention has grown through six technical annexes, each dedicated to a specific category of pollution. These annexes are the foundation of MARPOL and remain central to its implementation. Annex I addresses the prevention of pollution by oil. It includes requirements for double-hulled oil tankers, oil discharge monitoring and control systems, oily water separators, and record books. It is one of the most detailed annexes, reflecting the seriousness of oil pollution incidents. Annex II concerns the control of pollution by noxious liquid substances carried in bulk. It establishes categories for chemicals, prewash procedures, and restrictions on discharges, requiring chemical tankers to operate under strict safety and environmental standards. Annex III regulates the prevention of pollution by harmful substances carried by sea in packaged form. It is closely linked to the International Maritime Dangerous Goods (IMDG) Code, ensuring labeling, packaging, and documentation are standardized. Annex IV covers the prevention of pollution by sewage from ships. It requires ships to install approved sewage treatment plants or holding systems and regulates discharges into the sea, particularly in designated sensitive areas. Annex V deals with the prevention of pollution by garbage from ships. It prohibits the discharge of plastics, restricts the disposal of other wastes, and requires vessels to maintain garbage management plans and record books. This annex has been strengthened repeatedly to reflect the global urgency of reducing marine litter. Annex VI addresses the prevention of air pollution from ships. It limits emissions of sulfur oxides (SOx) and nitrogen oxides (NOx), regulates fuel oil quality, prohibits ozone-depleting substances, and introduces greenhouse gas reduction measures such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP), and the Carbon Intensity Indicator (CII). It also establishes Emission Control Areas where more stringent standards apply. Recent amendments highlight MARPOL’s responsiveness to modern environmental challenges. In 2024, Annex I was updated to require improved oil discharge monitoring equipment, while Annex II introduced expanded prewash obligations in the Baltic and North Sea to reduce chemical residues. Annex IV tightened sewage effluent standards, and Annex V expanded garbage management requirements to smaller ships and reinforced prohibitions on plastics. Annex VI amendments in 2024 introduced stricter nitrogen oxide limits for new engines and strengthened rules for ships using alternative fuels, ensuring adequate fire protection and fuel distribution systems in parallel with the IGF Code. By 2025, MARPOL continues to advance global decarbonization and environmental protection objectives. Annex VI now mandates enhanced monitoring and verification of the Carbon Intensity Indicator, requiring ships to achieve satisfactory efficiency ratings or adopt corrective action plans. This step places greater responsibility on shipping companies to reduce operational emissions. Electronic record books for oil, garbage, and cargo handling operations are increasingly being accepted in place of paper logs, reflecting the shift toward digital compliance and reducing administrative burdens. New reporting obligations for lost containers at sea, coordinated with parallel SOLAS amendments, will also apply from 2026, ensuring faster notification to authorities and minimizing environmental and navigational hazards. Annex III, through updates aligned with the IMDG Code, further enhances labeling and documentation for harmful substances in packaged form. These updates underline MARPOL’s role as a living instrument that evolves in response to both long-standing pollution risks and emerging challenges such as climate change, marine litter, and the transition to alternative fuels. The integration of greenhouse gas measures under Annex VI,

UNDERSTANDING ABOUT ISPS CODE

Introduction The International Ship and Port Facility Security (ISPS) Code is a comprehensive set of measures designed to enhance the security of ships and port facilities. It was adopted by the International Maritime Organization (IMO) under the framework of the International Convention for the Safety of Life at Sea (SOLAS), specifically through an amendment introduced in December 2002. The ISPS Code officially came into force on 1 July 2004, marking a turning point in maritime safety and global security.

SOLAS CONVENTION: LATEST UPDATES

The International Convention for the Safety of Life at Sea (SOLAS) is recognized as the cornerstone of international maritime safety law. Originally adopted in 1914 following the tragic loss of the RMS Titanic, it has since been revised several times to keep pace with technological and operational advances in shipping. The 1974 SOLAS Convention, which came into force in 1980, introduced the “tacit acceptance” procedure, allowing amendments to automatically enter into force on a specified date unless objected to by a certain number of member states. This system ensures SOLAS remains a dynamic, living instrument capable of adapting quickly to new safety concerns. SOLAS establishes uniform minimum safety standards in the design, construction, equipment, and operation of merchant ships. All ships engaged in international voyages must comply, subject to inspections and certification by their flag state administrations, as well as verification by port state control officers when calling at foreign ports. The Convention also incorporates mandatory codes such as the ISM Code, ISPS Code, Polar Code, and HSC Code, ensuring comprehensive safety measures. The treaty has grown into a holistic framework addressing every aspect of ship safety, including fire prevention, life-saving appliances, safe navigation, carriage of cargoes, maritime security, and the safe management of shipping companies. Its reach extends from traditional merchant vessels to modern high-speed craft, bulk carriers, and ships operating in polar waters. The most updated structure of the SOLAS Convention includes the following chapters: Chapter I – General Provisions: Survey, certification, and enforcement. Chapter II-1 – Construction – Structure, Subdivision, and Stability, Machinery and Electrical Installations: Integrity of ship structure and machinery. Chapter II-2 – Fire Protection, Fire Detection, and Fire Extinction: Fire safety systems, training, and response. Chapter III – Life-Saving Appliances and Arrangements: Lifeboats, life rafts, survival suits, and muster arrangements. Chapter IV – Radiocommunications: GMDSS and distress alert systems. Chapter V – Safety of Navigation: Voyage planning, navigational warnings, and mandatory equipment like ECDIS and AIS. Chapter VI – Carriage of Cargoes: Loading, stowage, and securing of general cargoes. Chapter VII – Carriage of Dangerous Goods: IMDG Code compliance and hazardous cargo provisions. Chapter VIII – Nuclear Ships: Special safety arrangements for nuclear-powered ships. Chapter IX – Management for the Safe Operation of Ships (ISM Code): Safety management systems and company responsibility. Chapter X – Safety Measures for High-Speed Craft (HSC Code): Special rules for fast passenger and cargo craft. Chapter XI-1 – Special Measures to Enhance Maritime Safety: Continuous surveys, ship identification numbers, and inspection regimes. Chapter XI-2 – Special Measures to Enhance Maritime Security (ISPS Code): Ship and port facility security levels, drills, and plans. Chapter XII – Additional Safety Measures for Bulk Carriers: Structural reinforcements and safety precautions. Chapter XIII – Verification of Compliance: IMO audits of member states’ compliance. Chapter XIV – Safety Measures for Ships Operating in Polar Waters (Polar Code): Safety, environmental, and crew training standards in polar regions. Chapter XV – Safety Measures for Ships Carrying Industrial Personnel: Safe design and operation of vessels carrying offshore or industrial workers. Chapter XVI – Safety Measures for the Carriage of More than 12 Industrial Personnel on International Voyages: Latest addition, providing detailed regulations for industrial transport. In 2024, several significant amendments entered into force, further strengthening the safety framework. Updates to Chapter II-1 on construction and stability enhanced watertight integrity and introduced refined methods for damage stability calculations. These improvements, particularly in Parts B-1, B-2, and B-4, applied to new vessels and modernized long-standing requirements. Fire safety also received attention, with amendments to the Fire Safety Systems (FSS) Code easing requirements for individual detector isolators, balancing safety with practical shipboard application. Changes to the Life-Saving Appliances (LSA) Code clarified standards for launching appliances, including rescue boats and free-fall lifeboats, while providing exemptions from certain dynamic testing requirements. At the same time, the International Code of Safety for Ships using Gases or Other Low-flashpoint Fuels (IGF Code) was updated, reinforcing provisions on fire protection, fuel distribution, and fixed extinguishing arrangements. These changes ensured that ships using LNG and other alternative fuels maintained higher safety margins. Other 2024 amendments addressed mooring equipment, requiring de

IALA Buoyage System

The IALA Buoyage System was developed by the International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA) to create a standard method of marking channels, hazards, and safe water. Its goal is to provide mariners with a reliable guide to safe navigation, no matter where they sail. 🔹IALA Regions The system is divided into two regions: Region A Covers Europe, Africa, Australia, and most of Asia. Port-hand marks: Red Starboard-hand marks: Green Region B Covers the Americas, Japan, Korea, and the Philippines. Port-hand marks: Green Starboard-hand marks: Red