The Four Pillars of the International Maritime Organization (IMO)

The International Maritime Organization (IMO) establishes global standards to promote safety, protect the marine environment, ensure proper training of seafarers, and safeguard their welfare. These standards are anchored on four key conventions known as the 4 Pillars of IMO: 1. SOLAS – Safety of Life at Sea (1974) SOLAS is considered the most important international treaty concerning maritime safety. It sets the minimum standards for the construction, equipment, and operation of ships to ensure they are safe for both crew and passengers. This includes: • Fire protection systems • Life-saving appliances • Navigation and communication requirements • Emergency preparedness Its ultimate purpose is to prevent loss of lives at sea. 2. MARPOL – Marine Pollution (1973/1978) MARPOL addresses the prevention of pollution from ships. It regulates: • Oil and chemical spills • Sewage and garbage discharge • Air emissions from ships Its goal is to protect the marine and coastal environment by minimizing pollution from ship operations and accidents. 3. STCW – Standards of Training, Certification, and Watchkeeping for Seafarers (1978) STCW sets global training and competency standards for seafarers working on commercial vessels. It ensures: • Seafarers are properly trained, qualified, and certified • Uniform watchkeeping and operational safety practices across the world This helps maintain a high level of professionalism and safety at sea. 4. MLC – Maritime Labour Convention (2006) The MLC is often called the “Seafarers’ Bill of Rights.” It ensures that seafarers have: • Fair wages and employment contracts • Safe working and living conditions • Adequate rest hours • Medical care, social protection, and welfare The convention promotes human rights and dignity for those working at sea.

VHF Marine Radio Channels

This VHF Marine Radio Channels guide presents a clear and practical overview of how Very High Frequency (VHF) radio channels are organized and used in maritime communication. It is designed to help seafarers, maritime students, and industry professionals quickly understand the correct use of each channel in daily operations and emergency situations. At the center of the guide is Channel 16, the internationally recognized channel for distress, safety, and calling, highlighting its vital role in emergency alerts and initial contact between vessels and shore stations. The diagram groups channels according to their operational purpose, including search and rescue (SAR), ship-to-ship safety information, port operations, commercial vessel communications, professional fishing vessels, recreational vessels, and maritime safety organizations. It also identifies channels dedicated to Digital Selective Calling (DSC) and VHF repeaters, supporting efficient distress alerting and extended communication coverage. Color Coding Guide: • Blue channels – Designated for ship-to-shore communications • Red channels – Used primarily for ship-to-ship communications • Black channels – Suitable for both ship-to-shore and ship-to-ship communications Overall, this guide serves as a reliable reference for proper VHF radio use, reinforcing international maritime communication standards while promoting safety, clarity, and effective coordination at sea.

JET CHISEL

A jet chisel (also called needle scaler) is a pneumatic tool made up of multiple thin steel rods (“needles”) that rapidly move back and forth when connected to compressed air. The vibration of the needles chips away rust, old paint, scale, and marine growth on metal surfaces. Think of it as “pangbaklas ng kalawang, pero industrial version.” Purpose: • Remove rust, corrosion, and scale from steel surfaces • Prepare metal before painting, welding, or coating • Clean areas where grinders and wire brushes can’t reach (corners, tight spots, edges) • Reduce manual scraping time and physical fatigue How to Use: 1. PPE First • Safety goggles / face shield • Ear protection (maingay ’yan) • Gloves • Mask (dust/rust particles) • Proper coverall 2. Check the Tool • Inspect air hose, connectors, and needles • Ensure air compressor pressure is within recommended range (usually 90 psi ± depending on tool) 3. Connect to Compressed Air • Attach hose firmly • Open the air valve gradually 4. Operate • Hold the tool with both hands • Press the needles gently against the surface — do not push too hard • Let the vibration do the work • Work in steady strokes 5. After Use • Shut off air supply • Clean and oil the needles to prevent rust • Store in dry location

Fire Extinguisher

A fire extinguisher is a portable safety device designed to control or put out small fires in emergency situations. It works by releasing a fire-suppressing agent that cools the fire, removes oxygen, or interrupts the chemical reaction of combustion. Fire extinguishers are commonly found on ships, buildings, and industrial areas as part of basic fire-fighting equipment. Main Parts and Their Functions Discharge Lever – When squeezed, it releases the extinguishing agent. Safety Pin – Prevents accidental discharge; must be pulled before use. Carrying Handle – Allows safe handling and control during operation. Pressure Gauge – Indicates whether the extinguisher is properly pressurized and ready for use. Pickup Tube (Siphon Tube) – Draws the extinguishing agent from the bottom of the cylinder. Gas Canister – Contains compressed gas that pushes the extinguishing agent out. Extinguishing Agent – The substance used to fight the fire (e.g., dry powder, foam, CO₂). Discharge Nozzle / Hose – Directs the agent accurately toward the base of the fire. Fire extinguishers are vital first-response tools and must always be properly maintained and correctly used for effective fire control.